|
|
|
| 高频电刀质量控制检测参数的设定及测量方法 |
| 邓文艳1，徐楚天1，周嫱2 |
| 1.首都医科大学附属北京朝阳医院 物
资器械中心，北京 100020；2.北京医
院 医学工程科，北京 100730 |
|
| The electrosurgical unit (ESU) is a kind of generally-used but high-risk equipment. Our
hospital implemented quality control of ESU in 2015 in line with the requirements of Beijing Municipal
Administration of Hospital. FLUKE QA-ES II high frequency electrosurgical detector and ESA 615
electrical safety analyzer were used to perform the quality inspection of the Model ERBE high frequency
electric knife and Force frequency electric knife from multiple aspects, including high frequency leakage
current detection, output power detection, wave crest factor detection, etc.. According to the test, 90%
of ESU in our hospital met the standards. Eventually, the precautions and problems during the test were
analyzed in this paper. |
| electrosurgical unit| quality control| high frequency electrosurgical detector| electrical safety
analyzer |
| DENG Wen-yan1, XU Chu-tian1,ZHOU Qiang2 |
| 引用本文: |
邓文艳1，徐楚天1，周嫱2. 高频电刀质量控制检测参数的设定及测量方法[J]. 中国医疗设备, 2016, 31(11): 125-126.
DENG Wen-yan1, XU Chu-tian1,ZHOU Qiang2. The electrosurgical unit (ESU) is a kind of generally-used but high-risk equipment. Our
hospital implemented quality control of ESU in 2015 in line with the requirements of Beijing Municipal
Administration of Hospital. FLUKE QA-ES II high frequency electrosurgical detector and ESA 615
electrical safety analyzer were used to perform the quality inspection of the Model ERBE high frequency
electric knife and Force frequency electric knife from multiple aspects, including high frequency leakage
current detection, output power detection, wave crest factor detection, etc.. According to the test, 90%
of ESU in our hospital met the standards. Eventually, the precautions and problems during the test were
analyzed in this paper.. China Medical Devices, 2016, 31(11): 125-126.
|
|
|
|
| 链接本文: |
| http://cs.china-cmd.org/zgylsb/CN/10.3969/j.issn.1674-1633.2016.11.036 或 http://cs.china-cmd.org/zgylsb/CN/Y2016/V31/I11/125 |
| [1] |
张卓斌,张运林.医院医疗设备质量控制与计量管理的实践与
|
| [2] |
GB 9706.1-2007,医用电气设备(第1部分):安全通用要求[S].
|
| [1] |
张卓斌,张运林.医院医疗设备质量控制与计量管理的实践与
|
|
北京:中国标准出版社,2007．
|
|
全专用要求[S].北京:中国标准出版社,2009．
|
| 思考[J] |
东南国防医药,2013,15(1):83-84.
|
|
北京:中国标准出版社,2007．
|
|
全专用要求[S].北京:中国标准出版社,2009．
|
|
全专用要求[S].北京:中国标准出版社,2009．
|
| 思考[J] |
东南国防医药,2013,15(1):83-84.
|
|
北京:中国标准出版社,2007．
|
| [3] |
GB 9706.4-2009,医用电气设备(第2-2部分):高频手术设备安
|
| 思考[J] |
东南国防医药,2013,15(1):83-84.
|
| [2] |
GB 9706.1-2007,医用电气设备(第1部分):安全通用要求[S].
|
| [3] |
GB 9706.4-2009,医用电气设备(第2-2部分):高频手术设备安
|
| [1] |
张卓斌,张运林.医院医疗设备质量控制与计量管理的实践与
|
| [2] |
GB 9706.1-2007,医用电气设备(第1部分):安全通用要求[S].
|
| [3] |
GB 9706.4-2009,医用电气设备(第2-2部分):高频手术设备安
|
| [1] |
吴敏1a，黄亚萍1a，黄丹1b，李婷婷2，汪长岭1a. 硬脑膜修复材料的临床使用评价和质控标准建立的研究[J]. 中国医疗设备, 2019, 34(3): 117-121. |
| [2] |
邢国杰，梅胜兰，相鸿坤. 一种荧光细胞标准计数样片的制备与应用[J]. 中国医疗设备, 2019, 34(2): 38-40. |
| [3] |
钱根年，陈自谦，钟群，肖慧，许尚文，付丽媛. PET/CT成像系统的质量控制[J]. 中国医疗设备, 2019, 34(2): 1-4. |
| [4] |
高其瑞1，唐其柱1，胡世辉2，王文芳2. PDCA在多参数监护仪质量控制中的应用[J]. 中国医疗设备, 2019, 34(2): 130-133. |
| [5] |
王春梅a，贾建国b，吴航c，黄莹a，宋礼坡a，隗立兵a，宁雅婵a，张建a. 经皮氧分压测定的质量控制问题及其改进思路[J]. 中国医疗设备, 2019, 34(2): 147-149. |
| [6] |
赖金滔1，杨绍洲1,2，柳明1，余展聪1，徐宝燕1. 新监管法规下医疗设备的验收管理[J]. 中国医疗设备, 2019, 34(1): 146-147. |
| [7] |
吴晓芬a，王培军b. 我国放射影像质量控制管理现状及发展趋势探讨[J]. 中国医疗设备, 2019, 34(1): 156-158. |
| [8] |
徐磊1a，孟庆乐1a，杨瑞1a，钱鑫宇1a，蒋红兵1b, 2. uMI 780 PET/CT NEMA性能指标测试研究[J]. 中国医疗设备, 2019, 34(1): 14-17. |
| [9] |
王守镜. 高频电刀的故障分析与质量控制[J]. 中国医疗设备, 2019, 34(1): 106-109. |
| [10] |
刘晏明，熊贵富，廖娟. 血液透析机质量控制的研究及探讨[J]. 中国医疗设备, 2018, 33(9): 49-52. |
| [11] |
刘晓东a，宋俊b. 结构化电子病历质量控制新模式实践与探讨[J]. 中国医疗设备, 2018, 33(9): 168-171. |
| [12] |
许剑1，范庆麟1，朱尘琪1，赵廷彪1，刘晓程2，刘志刚2，陈铁男2，张杰民2. 植入式磁液悬浮心室辅助装置的动物长期体内评价研究[J]. 中国医疗设备, 2018, 33(9): 19-22. |
| [13] |
刘广全a，梁静b，常玉锋a，吴晓亮a. 我院两种不同类型血液透析机的质量控制对比及分析[J]. 中国医疗设备, 2018, 33(9): 56-58. |
| [14] |
熊晖1,2，陈自谦2，陈冲1. MRI质量控制参数空间分辨力的智能检测模块设计[J]. 中国医疗设备, 2018, 33(8): 74-76. |
| [15] |
宋文杰，梁文文，赵献坤. 透析液获取、供给方式选取分析[J]. 中国医疗设备, 2018, 33(7): 164-167. |
|
|
|
|
