一种前交叉韧带单隧道双束重建分隔钉的研制

doi:10.3969/j.issn.1674-1633.2016.07.013

摘要
图/表
参考文献
相关文章 (0)

全文: PDF (1544 KB) HTML (26 KB)
输出: BibTeX | EndNote (RIS)

摘要本文阐述了一种前交叉韧带股骨端单隧道双束重建分隔钉的研制过程。该分隔钉呈流线型，横截面呈水滴状，侧方有突出的分束翅片，翅片尾端有防滑齿，相对侧有抗旋防滑齿。采用分隔钉能使肌腱更靠近解剖止点受力区，尽可能增大肌腱在足印区的分布面积，更好的达到解剖重建的要求，配合带袢钢板使用，在保证良好固定力的同时，将肌腱重新分布于解剖功能位置。

	服务

	把本文推荐给朋友
	加入我的书架
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	吕宏升¹
	杨德育¹
	王清铿¹
	杨爱武¹
	林洪光¹
	苏在权¹
	张春礼²
	尤瑞金¹

关键词 ：前交叉韧带, 单隧道双束重建, 关节镜技术, 分隔钉

Abstract：This paper elaborated the development of a separate nail for single-tunnel double-bundle femoral-end reconstruction of ACL (Anterior Cruciate Ligament). The separate nail was streamlined and teardrop-shaped on the cross section and had protuberant splitting fin on the side. At the end of splitting fin, skid-proof gears were seen; while, on the opposite side, anti-rotation skid-proof gears were designed. By using the separate nail, the tendon was closer to stess zone of anatomic stop, and the distribution area of tendon in the foot-print zone could be expanded as much as possible so as to achieve the requirement of anatomic reconstruction more likely. The combination of separate nails and the endobutton made the tendon redistributed to the anatomy-functional position and at the same time guaranteed favorable fixed force.

Key words： anterior cruciate ligament single-tunnel double-bundle reconstruction arthroscopy separate nails

收稿日期: 2016-02-20

R686.5

基金资助:2014年南京军区第18分部医学科技青年培育项目（18FB QN2014010）。

通讯作者: 尤瑞金 E-mail: 13959729666@163.com

作者简介:

引用本文:

吕宏升¹，杨德育¹，王清铿¹，杨爱武¹，林洪光¹，苏在权¹，张春礼²，尤瑞金¹. 一种前交叉韧带单隧道双束重建分隔钉的研制[J]. 中国医疗设备, 2016, 31(7): 45-47.
LV Hong-sheng¹,YANG De-yu¹,WANG Qing-keng¹,YANG Ai-wu¹,LIN Hong-guang¹,SU Zai-quan¹, ZHANG Chun-li²,YOU Rui-jin¹. Development of a Separate Nail for Single-Tunnel Double-Bundle Reconstruction of Anterior Cruciate Ligament. China Medical Devices, 2016, 31(7): 45-47.

链接本文:

http://cs.china-cmd.org/zgylsb/CN/10.3969/j.issn.1674-1633.2016.07.013 或 http://cs.china-cmd.org/zgylsb/CN/Y2016/V31/I7/45

[1]	Woo SL,Kanamori A,Zeminski J,et al.The effectiveness of
	reconstruction of the anterior cruciate ligament with hamstrings and
	patellar tendon . A cadaveric study comparing anterior tibial and rotational loads[J].J Bone Joint Surg Am,2002,84-A(6):907-914.
	Sports Med,2002,30(5):660-666.
[1]	Woo SL,Kanamori A,Zeminski J,et al.The effectiveness of
[1]	Woo SL,Kanamori A,Zeminski J,et al.The effectiveness of
	patellar tendon . A cadaveric study comparing anterior tibial and rotational loads[J].J Bone Joint Surg Am,2002,84-A(6):907-914.
[2]	Loh JC,Fukuda Y,Tsuda E,et al.Knee stability and graft function
	following anterior cruciate ligament reconstruction: Comparison
	Arthroscopy,2003,19:297-304．
[3]	Yagi M,Wong EK,Kanamori A,et al.Biomechanical analysis of
	reconstruction of the anterior cruciate ligament with hamstrings and
	patellar tendon . A cadaveric study comparing anterior tibial and rotational loads[J].J Bone Joint Surg Am,2002,84-A(6):907-914.
[2]	Loh JC,Fukuda Y,Tsuda E,et al.Knee stability and graft function
[2]	Loh JC,Fukuda Y,Tsuda E,et al.Knee stability and graft function
	following anterior cruciate ligament reconstruction: Comparison
	following anterior cruciate ligament reconstruction: Comparison
[3]	Yagi M,Wong EK,Kanamori A,et al.Biomechanical analysis of
	an anatomic anterior cruciate ligament reconstruction[J].Am J
	Sports Med,2002,30(5):660-666.
	reconstruction of the anterior cruciate ligament with hamstrings and
	between 11 o’clock and 10 o’clock femoral tunnel placement[J].
[3]	Yagi M,Wong EK,Kanamori A,et al.Biomechanical analysis of
	between 11 o’clock and 10 o’clock femoral tunnel placement[J].
	between 11 o’clock and 10 o’clock femoral tunnel placement[J].
	Arthroscopy,2003,19:297-304．
	Arthroscopy,2003,19:297-304．
	an anatomic anterior cruciate ligament reconstruction[J].Am J
	an anatomic anterior cruciate ligament reconstruction[J].Am J