|
|
三维打印技术及其在医疗领域的应用 |
张冠石,翟为 |
本刊海外编辑部,北京 100022 |
|
An Introduction to Three-dimensional Printing Technology and Its Clinical Applications |
ZHANG Guan-shi, ZHAI Wei |
International Office of CMD, Beijing 100022, China |
[17] |
卢秉恒,李涤尘.增材制造(3D打印)技术发展[J].机械制造与自动化,2013,42(4):1-4.
|
[8] |
CFP.3D打印新世界[J].中国海关,2013,(6):84-85.
|
[12] |
张桂兰.神奇的3D打印[J].数码印刷,2013,2(2):54-57.
|
[2] |
刘厚才,莫健华,刘海涛.三维打印快速成型技术及其应用[J].机械科学与技术,2008,27(9):1184-1190.
|
[13] |
李跃群.“3D打印”再造人体器官[N].东方早报,2013-2-22.
|
[5] |
胡发宗,赵毅,陈罡,等.三维立体打印机的成形技术.模具技术, 2004,(l):60-62.
|
[11] |
陈步庆,林柳兰,陆齐,等.三维打印技术及系统研究[J].机电一体化,2005,11(4):13-15.
|
[4] |
王强. 3D打印“小时代”[J].印刷工业,2013,(7):76-77.
|
[15] |
Terry Wohlers.Additive manufacturing and 3D printing state of the industry.Annual Worldwide Progress Report[C].Colorado:Wohlers Associates,Inc,2012:125-149.
|
[7] |
刘海涛.光固化三维打印成形材料的研究与应用[D].华中科技大学博士论文,2009.
|
[1] |
Scans EM,Haggerty S,Cima MJ,et al.Three-dimensional printing technique:US,5204055[P].1993-04-20.
|
[3] |
程科,鲁璐.3D打印:助推未来军事新变革[N].科技日报,2013-1-3.
|
[16] |
杨继全,徐国财.快速成形技术[M].北京:化学工业出版社, 2006:13-17.
|
[9] |
王灿才.3D打印的发展现状分析[J].丝网印刷,2012,(9):37-41.
|
[10] |
刘欣灵.3D打印机及其工作原理[J].网络与信息,2012,26(2):30.
|
[18] |
刘泗岩,卢光明,廖文和.影像实物建模的医学应用价值与局限[J].生物医学工程研究,2011,30(1):58-62.
|
[20] |
Sodian R,Schmauss D,Schmitz C,et al.3-Dimensional printing of models to create custom-made devices for coil embolization of an anastomotic leak after aortic arch replacem-ent[J].Ann Thorac Surg,2009,88(3):974-978.
|
[12] |
张桂兰.神奇的3D打印[J].数码印刷,2013,2(2):54-57.
|
[16] |
杨继全,徐国财.快速成形技术[M].北京:化学工业出版社, 2006:13-17.
|
[26] |
Paulo Bartolo,Jean-Pierre Kruth,Jorge Silva,et al.Biomedical production of implants by additive electro-chemical and physical processes[J].CIRP Annals,2012,61(2):635-655.
|
[27] |
AS Levey,G Danovitch,S Hou,et al.Living donor kidney transplantation in the United States—looking back,looking forward[J].American Journal of Kidney Diseases,2011,58(3):343-348.
|
[19] |
Riesenkampff E,Rietdorf U,Wolf I,et al.The practical clinical value of three-dimensional models of complex congenitally malformed hearts[J].J Thorac Cardiovasc Surg,2009,138(3):571-580.
|
[20] |
Sodian R,Schmauss D,Schmitz C,et al.3-Dimensional printing of models to create custom-made devices for coil embolization of an anastomotic leak after aortic arch replacem-ent[J].Ann Thorac Surg,2009,88(3):974-978.
|
[29] |
Kozakiewicz M,Elgalal M,Loba P,et al.Clinical application of 3D pre-bent titanium implants for orbital floor fractures[J].J Craniomaxillofac Surg,2009,37(4):229-334.
|
[37] |
张曙,金天拾,黄仲明.三维打印的现状与发展前景[J].机械设计与制造工程,2013,43(2):1-5.
|
[14] |
CR Garcia,RC Rumpf,HH Tsang,et al.Effects of extreme surface roughness on 3D printed horn antenna[J].Electronics Letters,2013,49(12):734-736.
|
[6] |
Ferry PW Melchels,Marco AN Domingosc,Travis J Klein,et al.Additive manufacturing of tiss-ues and organs[J].Progress in Polymer Science,2012,37(8):1079-1104.
|
[19] |
Riesenkampff E,Rietdorf U,Wolf I,et al.The practical clinical value of three-dimensional models of complex congenitally malformed hearts[J].J Thorac Cardiovasc Surg,2009,138(3):571-580.
|
[21] |
Tao Xu,Wei-xin Zhao,Jian-ming Zhu,et al.Complex heterogeneous tissue constructs containi-ng multiple cell types prepared by inkjet printing techn nology[J].Biomaterials,2013,34(1):130-139.
|
[11] |
陈步庆,林柳兰,陆齐,等.三维打印技术及系统研究[J].机电一体化,2005,11(4):13-15.
|
[22] |
Vladimir Mironov,Thomas Boland,Thomas Trusk,et al.Organ printing:computer-aided jet-based 3D tissue engineering[J].Trends in Biotechnology,2003,21(4):157-161.
|
[13] |
李跃群.“3D打印”再造人体器官[N].东方早报,2013-2-22.
|
[23] |
M Nakamura,A Kobayashi,F Takagi,et al.Biocompatible Inkjet Printing technique for designed seeding of individual living cells[J].Tissue Engineering,2005,11(11):1658-1666.
|
[14] |
CR Garcia,RC Rumpf,HH Tsang,et al.Effects of extreme surface roughness on 3D printed horn antenna[J].Electronics Letters,2013,49(12):734-736.
|
[15] |
Terry Wohlers.Additive manufacturing and 3D printing state of the industry.Annual Worldwide Progress Report[C].Colorado:Wohlers Associates,Inc,2012:125-149.
|
[24] |
Lothar Koch,Stefanie Kuhn,Heiko Sorg,et al.Laser Printing of Skin Cells and Human Stem Cells[J].Tissue Engineering Part C:Methods,2010,16(5):847-854.
|
[17] |
卢秉恒,李涤尘.增材制造(3D打印)技术发展[J].机械制造与自动化,2013,42(4):1-4.
|
[18] |
刘泗岩,卢光明,廖文和.影像实物建模的医学应用价值与局限[J].生物医学工程研究,2011,30(1):58-62.
|
[25] |
熊耀阳,陈萍,孙健.应用三维打印成型技术制备个体化多孔纯植入体的研究[J].生物医学工程学杂志,2012,29(2):247-250.
|
[28] |
新华社.美国3D打印帮助制造人耳[N].合肥晚报,2013-2-22.
|
[21] |
Tao Xu,Wei-xin Zhao,Jian-ming Zhu,et al.Complex heterogeneous tissue constructs containi-ng multiple cell types prepared by inkjet printing techn nology[J].Biomaterials,2013,34(1):130-139.
|
[30] |
毕晓萍,范先群,施沃栋,等.三维眶底重建钛网在复合性眼眶骨折中的应用[J].中国眼科杂志,2011,47(8):683-687.
|
[31] |
Sean V.Murphy,Aleksander Skardal,Anthony Atala.Evaluation of hydrogels for bio-printing applications[J].Society for Biomaterials, 2013,101A(1):272-284.
|
[32] |
Alexander P,Valery A,Peter C.Heterogeneous objects modeling and applications[M].New York:Springer-Verlag Berlin Heidelberg,2008:51-156.
|
[33] |
Simranpreet Singh Gill,Munish Kaplas.Efficacy of powder-based three-dimensional printing (3DP) technologies for rapid casting of light alloys[J].The International Journal of Advanced Manufacturing Technology,2011,52(1):53-64.
|
[34] |
刘国伟.美国重振工业第一要务-未来制造3D打印领风骚[J].聚焦,2013,(1):12-15.
|
[35] |
王雪莹.3D打印技术及其产业发展的前景预见[J].中国高新技术企业,2012,(12):3-5.
|
[36] |
黄健,姜山.3D打印技术将掀起“第三次工业革命”[J].新材料产业,2013,(1):62-67.
|
[37] |
张曙,金天拾,黄仲明.三维打印的现状与发展前景[J].机械设计与制造工程,2013,43(2):1-5.
|
[24] |
Lothar Koch,Stefanie Kuhn,Heiko Sorg,et al.Laser Printing of Skin Cells and Human Stem Cells[J].Tissue Engineering Part C:Methods,2010,16(5):847-854.
|
[26] |
Paulo Bartolo,Jean-Pierre Kruth,Jorge Silva,et al.Biomedical production of implants by additive electro-chemical and physical processes[J].CIRP Annals,2012,61(2):635-655.
|
[27] |
AS Levey,G Danovitch,S Hou,et al.Living donor kidney transplantation in the United States—looking back,looking forward[J].American Journal of Kidney Diseases,2011,58(3):343-348.
|
[28] |
新华社.美国3D打印帮助制造人耳[N].合肥晚报,2013-2-22.
|
[30] |
毕晓萍,范先群,施沃栋,等.三维眶底重建钛网在复合性眼眶骨折中的应用[J].中国眼科杂志,2011,47(8):683-687.
|
[31] |
Sean V.Murphy,Aleksander Skardal,Anthony Atala.Evaluation of hydrogels for bio-printing applications[J].Society for Biomaterials, 2013,101A(1):272-284.
|
[32] |
Alexander P,Valery A,Peter C.Heterogeneous objects modeling and applications[M].New York:Springer-Verlag Berlin Heidelberg,2008:51-156.
|
[22] |
Vladimir Mironov,Thomas Boland,Thomas Trusk,et al.Organ printing:computer-aided jet-based 3D tissue engineering[J].Trends in Biotechnology,2003,21(4):157-161.
|
[23] |
M Nakamura,A Kobayashi,F Takagi,et al.Biocompatible Inkjet Printing technique for designed seeding of individual living cells[J].Tissue Engineering,2005,11(11):1658-1666.
|
[38] |
袁志彬.3D打印的发展趋势和政策建议[N].东方早报,2013-5-21.
|
[29] |
Kozakiewicz M,Elgalal M,Loba P,et al.Clinical application of 3D pre-bent titanium implants for orbital floor fractures[J].J Craniomaxillofac Surg,2009,37(4):229-334.
|
[33] |
Simranpreet Singh Gill,Munish Kaplas.Efficacy of powder-based three-dimensional printing (3DP) technologies for rapid casting of light alloys[J].The International Journal of Advanced Manufacturing Technology,2011,52(1):53-64.
|
[34] |
刘国伟.美国重振工业第一要务-未来制造3D打印领风骚[J].聚焦,2013,(1):12-15.
|
[35] |
王雪莹.3D打印技术及其产业发展的前景预见[J].中国高新技术企业,2012,(12):3-5.
|
[25] |
熊耀阳,陈萍,孙健.应用三维打印成型技术制备个体化多孔纯植入体的研究[J].生物医学工程学杂志,2012,29(2):247-250.
|
[36] |
黄健,姜山.3D打印技术将掀起“第三次工业革命”[J].新材料产业,2013,(1):62-67.
|
[38] |
袁志彬.3D打印的发展趋势和政策建议[N].东方早报,2013-5-21.
|
|
|
|