Design of Multi-Parameter Electrocardiograph Monitor Based on CAN Network
XIA Yun-cheng1, SUN Ning2, XIAO Guang-bing2
1. Department of Equipment, The People’s Hospital of Rugao, Nantong Jiangsu 226500, China; 2. College of Automobile and Traffic Engineering, Nanjing Forestry University, Nanjing Jiangsu 210037, China
Abstract：Objective To design a multi-parameter electrocardiograph monitor based on CAN network. Methods Applied with CAN network, ECG (electrocardio), SPO2, NBP (non-invasive blood pressure) and other vital signs parameters are dynamically detected, the ECG algorithm is also improved by wavelet, so as to improve the accuracy of ECG. Results This method could effectively identify the location of wave R from the noise interference, and has high accuracy rate of 99.83%. Conclusion This device could get work with simple structure, high integration, which also achieves a real-time monitoring in unattended conditions.
夏云成，孙宁，肖广兵. 基于CAN网络的多参数心电监护仪的设计[J]. 中国医疗设备, 2013, 28(12): 32-35.
XIA Yun-cheng, SUN Ning, XIAO Guang-bing. Design of Multi-Parameter Electrocardiograph Monitor Based on CAN Network. China Medical Devices, 2013, 28(12): 32-35.
